Get High Access is a Brentwood based affordable solution to get those hard to reach jobs done in a safe and time effective manner.
We aim to provide a very friendly, reliable and flexible service.
Offering a fully insured IPAF certified operator who will arrive on site and safely set up and operate the cherry picker allowing you or your tradesmen to concentrate solely on the job in hand.
Where conventional high access solutions won’t cut it, Get High Access platforms are suitable for all work at height where time, convenience and money are important factors:
Our aim is to help you get your jobs done safely, in as quick a time as possible without the use of scaffolding hanging around for days before and after the job has been completed, or more importantly risking life and limb perched on top of a very tall ladder!
Call our Brentwood office on 01277 812930 for more details
The Nifty 170 HDET has a working height of up to 17.1 metres (56ft) and a working outreach of up to 8.7 metres (28ft 6 in). It has both the use of a diesel engine and deep cycle industrial batteries for quiet operation and fume free environment for indoor use.
It also has traction drive allowing one person to easily manoeuvre the machine on site, even on softer ground.
Please see diagrams for the full dimensions and capabilities of the Nifty 170 HDET.
N.B. Please take note of the working width of the outriggers. The ground must be reasonably flat and firm.
Also, please be aware of overhead power cables etc. that might be in situ.
Also available for hire is this truckmounted RuthmannSteiger T 330 which has a massive 33 meter working height and a 21.2 meter out reach.
| Working height: | 33,00 m |
| Lifting height: | 31,00 m |
| Outreach: | 21,20 m* |
| Range of rotation: | 500° |
| Swivelling angle of the jib: | 185° |
| Working cage size: | 1,70 x 0,86 m |
| Working cage load: | 320 kg |
| Overal height: | 3,56 m |
| Total length: | 8,79 m |
| Permissible inclination: | 5°** |
| Permissible total weight from: | 7.490 kg |
| Chassis wheelbase from: | 3.90 m |
Also available for hire, is this narrow access cherry picker with an overall stowed height of less than 2 meters and a width of less than 80cm! The CTE Traccess 170 can pass through standard single doors and side gates etc, enabling you to get to work in otherwise restricted areas!
Once in position it has an impressive working height of 17 meters and an outreach of 7.5 meters. Please see full details below.
(Delivery costs may apply depending on location)
½ Day (Local Areas Only)
4 hours (½ day) = from £200.00
8 hours (full day) = from £350.00
The RuthmannSteiger T 330 is only available for hire supplied with an IPAF certified and fully insured operator.
N.B. Payment will be required at the time of booking
Delivery costs may apply depending on job location
The CTE Traccess 170 is only available for hire supplied with an IPAF Certified and fully insured operator.
A Delivery charge may be applicable depending on job location)
Clapgate Farm Buildings, Bird Lane, Warley, Brentwood, Essex CM13 3DP
